Resistance & Capacity Lithium Battery 16 cell MEGACELL CHARGER & TESTER - Network Wi-Fi App - Auto Lable Printing

Over 900 units sold and TESTED world wide and stories abound with 50 & 60 units working as one in the mass recycling of Lithium Cells. As you know we started in the Lithium business back in 97, how times have changed.
This software driven charger & tester is a revolution in Automation and accuracy that stops you repairing, rebuilding, chasing out the bad cell in the build after only weeks of operation.
Enjoy your efforts aliened with longevity. Get it right first time and enjoy your success. Once set to your own specs, all you do is insert the cellS in to the MEGACELL CHARGER, wait for your preset cycles to complete, it saves all the collected data, (again your settings) into a Test Results Data Base and prints out the adhesive label onto Dymo or Brother labels, you place the label on the cells and remover from charger,16 at a time……SIMPLE….

Building – Repairing – Rebuilding – Creating your Lithium Project. Need ACCURACY, SPEED, AUTOMATION, WHICH CELLS GO WHERE GUIDE?? This MEGACELL CHARGER Really does do it ALL!

You only need 5Vdc at 20Amps per unit to power it and setup is as easy as following the step by step Video’s.

Lithium cell recovery process requires measuring the capacity of the lithium cells by fully charging and discharging them while precisely measuring the amount of electricity stored, temperature, and internal resistance. After the measuring process, the cells must be recharged to nominal voltage to dispose of or use during pack creation safely. Cell measurement is a very tedious process when using conventional devices with no digital output, no ability to connect to a database, and no ability to print the test results on a label for each cell. To speed up the testing process, we have built a 16 cells device, that’s four times more cells than conventional testers, and we also added wireless connectivity. A single computer can control 254 machines. That’s a total of 4,064 cells at a time. The PC software allows monitoring all the cells in real-time, including charging and discharging graphs, temperature, and internal resistance of each cell. All the test info can be printed on a thermal label applied to each cell for fast tagging and further automation for cell placement inside packs or voltage remeasurement after a while to detect self-discharging.

Megacell Charger Features